Creality Ender-5 S1 3D Printer for High-temp 250mm/s High-Speed Printing with Direct Drive Extruder Auto-leveling and Smart Sens

Creality Ender-5 S1 3D Printer for High-temp 250mm/s High-Speed Printing with Direct Drive Extruder, Auto Leveling, Stable Cube Frame High Precision, Build Size 220X220X280mm

Product Description:

250mm/s High-speed Printing: Refined motion system with a standalone motor at each X/Y/Z axis for up to 2000mm/s² acceleration, and a steel transmission shaft that connects and syncs the Y-axis belts. It halves the printing time and boosts efficiency.

Clog-free Direct Extrusion at 300℃: The “Sprite” dual-gear direct extruder delivers a strong 80N extrusion force. The hotend features a titanium heatbreak blocking heat creep, a corrugated heatsink for rapid cooling, and a 50mm³ large melting chamber to fully melt the filament. It can print PLA, TPU, PETG, ABS, and more, clog-freely for 1,000 hours.

Stable Frame Underpins Quality: An all-metal cube frame goes with the classic Cartesian structure. The stability is enhanced by thick linear shafts, extra gussets, two cantilevers, and silicone bed mounts. It ensures a 100% success rate for 1,000h printing at 250mm/s.
Auto-leveling and Smart Sensors: The CR Touch probe realizes fully-automatic precise 25-point bed leveling. The Z-offset can be adjusted at 0.05 accuracy with touch control. It also has a filament runout sensor and power loss recovery to factor in accidental moments. It is a tool to always count on.

Bendable PC Surface and Greater Ease: The PC spring steel sticks to the first layers firmly, enables print removal with a slight bend, and its magnetic base with 2 notches allow quick snap-on. Also easy to use with 4.3in color touch screen, USB-C cable printing, modular design, aviation connector, and tidy wire harness sleeve.

Specification:

Model:Ender 5 S1 3D Printer
Build Volume: 220*220*280mm
Product Dimensions: 425x460x570mm
Net Weight: 12.1kg
Extruder Type: "Sprite" dual-gear direct drive extruder
Extruder Material: All metal
Leveling Mode: CR Touch auto-leveling
Mainboard: 32-bit silent mainboard
Display Screen: 4.3 inch color touchscreen
Max. Printing Speed: ≤250mm/s
Typical Printing Speed: ≤120mm/s
Acceleration: 2000mm/s²
Nozzle Type: Brass nozzle x1
Nozzle Diameter: Standard 0.4mm
Printing Accuracy: ±0.1mm
Layer Height: 0.05-0.35mm
Filament Diameter: 1.75mm
Nozzle Temperature: ≤300°C
Heatbed Temperature: ≤110°C
Build Surface: PC spring steel sheet
Power Loss Recovery: Yes
Filament Runout Sensor: Yes
Rated Voltage: 100-120V~, 200-240V~, 50/60Hz
Rated Power: 350W
File Transfer: TF card, USB Type-C cable
File Formats: STL, OBJ, AMF
Supported Filaments: PLA, PETG, ABS, TPU, PC, ASA, HIPS
Slicing Software: Creality Slicer, Creality Print, Cura, Repetier-Host, Simplify3D
UI Languages: "English, Spanish, German, French, Russian, Portuguese, Italian, Turkish, Chinese"
Package Weight: 14.7kg
Package Dimensions: 528x474x340mm

Features:This transparent black acrylic box is design for Ender 5 S1 3D printer.
Constant Temperature Printing: Keeps the temperature inside the box constant for better model adhesion and more fine detail.
Noise Reduce Blocks: Most of the noise during printing, so you can print happily at night.
Dust Proof: Prevent dust from entering the inside of the enclosure and keep a clean printing environment.
Quick Installation: No tedious steps, easy to install.Specification:Applicable Model: Ender 5 S1
Product Material: Acrylic
Product Color: Black Transparent
Package Size: 450×450×40mm/17.7×17.7×1.5in
Package Weight: 2.6kg/5.7lbPacking List:1 x Ender-5 S1 Acrylic Enclosure